Editor's Pick

Let us help you find the perfect store for your flooring needs!

Moisture Control

August 17, 2018 Published by

By Brett Miller, NWFA

If there is one topic that seems to capture the attention of wood flooring professionals everywhere, it is moisture. Too much and wood floors can cup or even buckle. Too little and wood floors can gap or even split. The key to optimum long-term performance is to maintain moisture in just the right balance, which involves a variety of steps before, during and after the installation takes place.

Wood is a hygroscopic material, which means that it gains or loses moisture in response to its environment. In wet, humid conditions, wood will gain moisture and expand. In dry, non-humid conditions, wood will lose moisture and shrink. This is a natural reaction of wood and is completely normal. The problem occurs when there is too much moisture, or too little.

Before wood floors arrive at the jobsite, all wet trades should be completed. This includes foundations, drywall, paint, masonry work, and any other construction or remodeling activity that will introduce moisture to the environment. Once these tasks are completed, and the HVAC is installed and running, the wood should be delivered to the job site and allowed to acclimate to the environment. This can take several days depending on the species and type of wood being used, as well as the geographic location of the job site.

During installation, both the wood and the subfloor should be tested for moisture content. Installation should not begin until moisture readings are within the ranges acceptable for the area.

After installation, most moisture issues can be avoided by maintaining a stable living environment. This generally is accomplished by maintaining the temperature of the structure between 60 – 80 degrees Fahrenheit, and the humidity of the structure between 30 – 50%.

Proper maintenance can be an issue as well. Water and steam mops should be avoided since both can introduce more moisture to the flooring. Over time, this can dull the finish, and even damage the wood.

Sometimes, despite all these precautions, moisture still can wreak havoc on a wood floor.  Faulty dishwashers, overflowing sinks, leaky pipes, malfunctioning ice makers, careless homeowners – all these problems can introduce moisture to wood floors, causing significant damage if ignored and untreated.  Once this happens, the moisture source must be found and eliminated.

Moisture Control

August 17, 2018 Published by
Post Categories: Sélection de la Couleur

By Brett Miller, NWFA

If there is one topic that seems to capture the attention of wood flooring professionals everywhere, it is moisture. Too much and wood floors can cup or even buckle. Too little and wood floors can gap or even split. The key to optimum long-term performance is to maintain moisture in just the right balance, which involves a variety of steps before, during and after the installation takes place.

Wood is a hygroscopic material, which means that it gains or loses moisture in response to its environment. In wet, humid conditions, wood will gain moisture and expand. In dry, non-humid conditions, wood will lose moisture and shrink. This is a natural reaction of wood and is completely normal. The problem occurs when there is too much moisture, or too little.

Before wood floors arrive at the jobsite, all wet trades should be completed. This includes foundations, drywall, paint, masonry work, and any other construction or remodeling activity that will introduce moisture to the environment. Once these tasks are completed, and the HVAC is installed and running, the wood should be delivered to the job site and allowed to acclimate to the environment. This can take several days depending on the species and type of wood being used, as well as the geographic location of the job site.

During installation, both the wood and the subfloor should be tested for moisture content. Installation should not begin until moisture readings are within the ranges acceptable for the area.

After installation, most moisture issues can be avoided by maintaining a stable living environment. This generally is accomplished by maintaining the temperature of the structure between 60 – 80 degrees Fahrenheit, and the humidity of the structure between 30 – 50%.

Proper maintenance can be an issue as well. Water and steam mops should be avoided since both can introduce more moisture to the flooring. Over time, this can dull the finish, and even damage the wood.

Sometimes, despite all these precautions, moisture still can wreak havoc on a wood floor.  Faulty dishwashers, overflowing sinks, leaky pipes, malfunctioning ice makers, careless homeowners – all these problems can introduce moisture to wood floors, causing significant damage if ignored and untreated.  Once this happens, the moisture source must be found and eliminated.

Comments are closed.

Eastern and Central Canada

Unit 2, 201 Whitehall Drive
Markham, ON, L3R 9Y3

Get Directions
Tel: 905-475-0938

Tel: 905-475-0938

Toll Free: 1-855-212-OAKS

Toll Free: 1-855-212-OAKS

Fax: 905-475-9913

Fax: 905-475-9913

Hours of operation

Mon to Fri, 9:00am-5:30pm EST
Closed on weekends and holidays

Western Canada

Unit 140, 10450 – 50 Street SE.
Calgary, AB, T2C 5P8

Get Directions
Tel: 587-316-5150

Tel: 587-316-5150

Toll Free: 1-888-316-5140

Toll Free: 1-888-316-5140

Fax: 587-316-5199

Fax: 587-316-5199

Hours of operation

Mon to Fri, 8:00am-5:00pm MT
Closed on weekends and holidays

USA

3001 Woodbridge Avenue, Unit A1
Edison, NJ, USA, 08837

Get Directions
Toll Free: 1(833) 212-6257

Toll Free: 1(833) 212-6257

Fax: 1(877) 650-1118

Fax: 1(877) 650-1118

Hours of operation

Mon to Fri, 8:00am-5:00pm EST
(Warehouse opens 8:30am-5:00pm)
Closed on weekends and holidays

© 2021 Twelve Oaks® Floors. All Rights Reserved.

Web Design by nvision